Professional product for sterilization and disinfection – MICROSTOP
The ultrasonic cleaner is your reliable assistant during the instrument pre-sterilisation stage. With this simple yet powerful device, you can ensure maximum cleanliness of instruments and prepare them for the next step - sterilisation.
The MicroSTOP MU-EXPERT professional ultrasonic cleaner is designed to clean a variety of metal and plastic objects. It is used for cleaning medical, dental, beauty and manicure instruments, burs, jewellery, kitchen utensils, etc. A special feature of this model is the ceramic heater, which increases the water temperature up to 65°C for even deeper cleaning.
Features
- Stainless steel tank with a volume of 3 l and a length of 25 cm: simultaneous cleaning of a large number of instruments, including long instruments.
- Ultrasonic emitter frequency of 36 kHz and power of 150 W: the cleaner easily removes the most stubborn soiling.
- Cleaning time from 1 to 30 minutes: choose the optimum cleaning time depending on the type of instruments and their degree of contamination.
- Possibility of using a disinfectant solution: for simultaneous cleaning and disinfection of instruments.
- Liquid heating function from 40°C to 60°C and additional "Degassing" mode: increases cleaning efficiency thanks to high water temperature and elimination of air bubbles from the liquid.
- Solution replacement timer: reliable control of solution quality to ensure timely renewal.
- Drain valve and hose: quick and convenient tank emptying.
- Double protection against overvoltage and overheating: safe, stable operation of the appliance.
- Integrated noise reduction function: ensures quiet operation without discomfort.
- Durable technical polymer housing: resistant to moisture and mechanical damage.
How to use
Installing the appliance
Place the ultrasonic cleaner on a flat, stable and dry surface. Make sure the appliance is correctly connected to a suitable electrical socket.
Filling the tank
Fill the stainless steel tank with clean water (or a suitable disinfectant solution) to the level indicated. Never run the appliance empty.
Fill the stainless steel tank with clean water (or a suitable disinfectant solution) to the level indicated.
Adding solution (if required)
If required, add a compatible cleaning or disinfecting solution, following the manufacturer's recommendations.
Placing instruments
Place the instruments in the basket (if supplied) or directly in the tank, without stacking them excessively, to allow the ultrasound to act effectively on all surfaces.
Setting parameters
Select the cleaning time (from 1 to 30 minutes) depending on the level of contamination.
Enable the heating function (40°C to 60°C) if required.
Use the "Degassing" mode when filling for the first time or after changing the solution to improve efficiency.
Start cleaning
Close the lid and start the cycle. Wait for the end of the programme without opening the appliance.
End of cycle
Once cleaning is complete, carefully remove the instruments. Rinse them with clean water if necessary and dry them thoroughly before sterilisation.
Draining and maintenance
Use the drain valve and hose to empty the tank. Clean and dry the tank after use.
Precautions
- Never operate the appliance without liquid in the tank.
- Use only solutions compatible with ultrasonic cleaners.
- Do not immerse the appliance or control panel in water.
- Unplug the appliance before any maintenance or cleaning.
- Do not touch the liquid or instruments during operation.
- Do not exceed the recommended temperature.
- Replace the solution regularly to ensure optimum effectiveness.
- Keep the device out of the reach of children.
- In the event of a malfunction (unusual noise, smell, overheating), switch off the appliance immediately and contact technical service.